Spray dry lubricant WD-40 Specialist with PTFE 250ml

WD-40 Specialist Dry Lubricant Spray with PTFE.

This solution contains PTFE which provides better lubrication and leaves a dry layer that does not attract dirt, dust or oil.

The solution dries quickly and reduces friction, extending the life of tools or parts.

Also suitable for demoulding products from a mould.

This PTFE Dry Lubricant Spray is resistant to temperatures from -45°C to +260°C.

Does not attract dirt, dust and oil and dries quickly to save time.

Suitable for locks and latches, door and window guides, blades and drill bits of power tools, gears and chains.

Hazard statements:

H222, cat. 1: Extremely flammable aerosol.

H225, cat. 2: Highly flammable liquid and vapour.

H229, cat. 1: Pressurized container: may burst if heated.

H304, cat. 1: May be fatal if swallowed and enters respiratory tract.

H315, cat. 2: Causes skin irritation.

H336, cat. 3: May cause drowsiness or dizziness.

H411, cat. 2: Toxic to aquatic organisms with long lasting effects.

Precautionary statements:

P101: If medical advice is needed, have this container or label at hand.

P102: Keep out of the reach of children.

P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.

P211: Do not spray on an open flame or other ignition source.

P251: Do not pierce or burn, even after use.

P261: Avoid breathing dust/fume/gas/mist/vapour/spray.

P273: Avoid release to the environment.

P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.

P312: Call a POISON CENTER/doctor if you feel unwell.

P405: Store locked up.

P410+P412: Protect from sunlight. Do not expose to temperatures above 50°C.

P501: Dispose of contents/packaging in accordance with the applicable legal regulations regarding waste disposal.